Connecting your pc to the controllogix processor – ProSoft Technology MVI56-DFCM User Manual

Page 13

Text mode
Original mode

MVI56-DFCM ♦ ControlLogix Platform

Start Here

DF1 Half/Full Duplex Master/Slave Serial Communication Module

User Manual

ProSoft Technology, Inc.

Page 13 of 106

September 24, 2014

3 With a firm but steady push, snap the module into place.
4 Check that the holding clips on the top and bottom of the module are securely

in the locking holes of the rack.

5 Make a note of the slot location. You must identify the slot in which the

module is installed in order for the sample program to work correctly. Slot
numbers are identified on the green circuit board (backplane) of the
ControlLogix rack.

6 Turn power ON.

Note: If you insert the module improperly, the system may stop working, or may behave
unpredictably.