Command usage for limitorque products, 7 command usage for limitorque products – ProSoft Technology MVI56-LTQ User Manual
Page 80
Reference
MVI56-LTQ ♦ ControlLogix Platform
User Manual
Limitorque Valve Actuator Master Communication Module
Page 80 of 98
ProSoft Technology, Inc.
August 30, 2010
5.7
Command Usage for Limitorque Products
This topic describes the commands supported in the MVI56-LTQ module and
their association with different Limitorque interfaces.
LTQ Commands
MX-DDC
UEC-3-DDC
I/O Module
Open
Yes
Yes
Do Not Use
Stop
Yes
Yes
Do Not Use
Close
Yes
Yes
Do Not Use
Start Network ESD
Yes
Yes
Do Not Use
Stop Network ESD
Yes
Yes
Do Not Use
Reset
Engage Relay #1
Yes (AS-1)
Do Not Use
Yes (K2)
Engage Relay #2
Yes (AS-2)
Do Not Use
Yes (K1)
Engage Relay #3
Yes (AS-3)
Yes (K3)
Yes (K3)
Engage Relay #4
Yes (AS-4)
Do Not Use
Yes (K4)
Engage Relay #5
Yes (AR-1)
Do Not Use
Yes (K5)
Engage Relay #6
Yes (AR-2)
Yes (K6)
Yes (K6)
Disengage Relay #1
Yes (AS-1)
Do Not Use
Yes (K2)
Disengage Relay #2
Yes (AS-2)
Do Not Use
Yes (K1)
Disengage Relay #3
Yes (AS-3)
Yes (K3)
Yes (K3)
Disengage Relay #4
Yes (AS-4)
Do Not Use
Yes (K4)
Disengage Relay #5
Yes (AR-1)
Do Not Use
Yes (K5)
Disengage Relay #6
Yes (AR-2)
Yes (K6)
Yes (K6)
Send Valve Position
Enable Valve Position