Stopping the data analyzer, Returning to the main menu, Data analyzer tips – ProSoft Technology MVI56-LTQ User Manual
Page 49

MVI56-LTQ ♦ ControlLogix Platform
Diagnostics and Troubleshooting
Limitorque Valve Actuator Master Communication Module
User Manual
ProSoft Technology, Inc.
Page 49 of 98
August 30, 2010
Character
Definition
[ ]
Data enclosed in these characters represent data received on the port.
< >
Data enclosed in these characters represent data transmitted on the port.
These characters are inserted when the RTS line is driven high on the port.
These characters are inserted when the RTS line is dropped low on the port.
These characters are displayed when the CTS line is recognized high.
_TT_
These characters are displayed when the timing mark interval has been reached.
This parameter is user defined.
Press [S]
to stop the data analyzer. Use this option to freeze the display so the
data can be analyzed. To restart the analyzer, press [B].
Stopping the Data Analyzer
Important: When in analyzer mode, program execution will slow down. Only use this tool during a
troubleshooting session. Before disconnecting from the Config/Debug port, please press [S]
to stop
the data analyzer, and then press [M]
to return to the main menu. This action will allow the module
to resume its normal high speed operating mode.
Press [M]
to return to the Main menu.
Returning to the Main Menu
4.3.5 Data Analyzer Tips
From the main menu, press [A]
for the "Data Analyzer". You should see the
following text appear on the screen:
After the "Data Analyzer" mode has been selected, press [?]
to view the Data
Analyzer menu. You will see the following menu: