ProSoft Technology MVI56-LTQ - Manual (Page 12)

Start Here MVI56-LTQ ♦ ControlLogix Platform
User Manual Limitorque Valve Actuator Master Communication Module
Page 12 of 98 ProSoft Technology, Inc.
August 30, 2010
1.1 System Requirements
The MVI56-LTQ module requires the following minimum hardware and software
components:
 Rockwell Automation ControlLogix™ processor, with compatible power
supply and one free slot in the rack, for the MVI56-LTQ module. The module
requires 800 mA of available power.
 Rockwell Automation RSLogix 5000 programming software version 2.51 or
higher
 Rockwell Automation RSLinx communication software
 Pentium
® II 450 MHz minimum. Pentium III 733 MHz (or better)
recommended
 Supported operating systems:
o Microsoft Windows XP Professional with Service Pack 1 or 2
o
Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3
o
Microsoft Windows Server 2003
 128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended
 100 Mbytes of free hard disk space (or more based on application
requirements)
 256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color
1024
× 768 recommended)
 CD-ROM drive
 ProSoft Configuration Builder, HyperTerminal or other terminal emulator
program.
Note: You can install the module in a local or remote rack. For remote rack installation, the module
requires EtherNet/IP or ControlNet communication with the processor.