ProSoft Technology MVI56-LTQ - Manual (Page 77)

MVI56-LTQ ♦ ControlLogix Platform Reference
Limitorque Valve Actuator Master Communication Module User Manual
ProSoft Technology, Inc. Page 77 of 98
August 30, 2010
5.6 LTQValve Object Definition
This section describes each member of the LTQValve object of the module
object.
Member Name MX-DDC UEC-3-DDC
ValvePos Analog Register Valve Position (0 - 100%) Valve Position (0 - 100%)
Status Status Register
Bit 00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Opened
Closed
Stopped
Opening
Closing
Valve Jammed
Local Mode Selected
Combined Fault *
Thermal Overload Fault
Future Use
Channel A Fault
Channel B Fault
Open Torque Switch Fault
Close Torque Switch Fault
Manual Operation
Phase Error
Opened
Closed
Stopped
Opening
Closing
Valve Jammed
Local Mode Selected
Combined Fault *
Thermal Overload Fault
Fail De-Energize
Channel A Fault
Channel B Fault
Open Torque Switch Fault
Close Torque Switch Fault
Manual Operation
Phase Error
Fault Fault Register
Bit 00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Not Used
Not Used
Not Used
Not Used
Phases Missing
Phase Reversed
Not Used
Not Used
Not Used
Not Used
Network ESD is ON **
Local ESD is ON
Unit Reset since last poll
Local Stop Selected
Opening in Local
Closing in Local
Open Verify Fault
Close Verify Fault
Open De-Energize Fault
Close De-Energize Fault
Phases Missing
Phase Reversed
Manual Mid to Open
Manual Open to Mid
Manual Mid to Close
Manual Close to Mid
Network ESD is ON**
Local ESD is ON
Unit Reset since last poll
Wrong Rotation
Opening in Local
Closing in Local
* Combined Fault:
Bit 07 of Field Unit Status Register (Word 1) indicates a fault when both bits 10
AND 11, or bit 05, or 08, or 09, or 15 indicate a fault.
** Field unit Network ESD
Parameter must be configured to Open, Stop, or Close.