ProSoft Technology ILX69-PBS - Manual (Page 95)

ILX69-PBS ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS Slave Communication Module User Manual
ProSoft Technology, Inc. Page 95 of 102
March 20, 2015
Start/Stop Communication
PROFIBUS communications can be started/stopped by using the "NRDY" (NotReady) Bit.
When this bit is set, the communication between the ILX69-PBS and all slaves is stopped.
All slaves will clear their outputs and the master will be in stop mode. This control bit allows
the user program to make a controlled start of the communication with the PROFIBUS
network.
9.2 Disposal of Electronic Equipment Waste
As a consumer, you are legally obliged to dispose of all electronic equipment waste
according to national and local regulations.
Waste Electronic Equipment
 This product must not be treated as household waste.
 This product must be disposed of at a designated waste electronic equipment
collecting point.
9.3 References
[1] PROFIBUS DP Slave Protocol API Manual, Revision 19, Hilscher GmbH 2013
[2] PROFIBUS DP Slave Protocol API Manual, Revision 15, Hilscher GmbH 2013