ProSoft Technology ILX69-PBS - Manual (Page 59)

ILX69-PBS ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS Slave Communication Module User Manual
ProSoft Technology, Inc. Page 59 of 102
March 20, 2015
Structure member Data type Description
AlaAckResp DINT Alarm Acknowledge Responses
AlaAckErr DINT Alarm Acknowledge Errors
ErrRespUsr DINT Erroneous Responses from User
UnxRespUsr DINT Unexpected Responses from User
ILX69-PBS Input Data (PROFIBUS Network Output Data)
Starting at byte 136, the remainder of the ILX69-PBS input array is used for the PROFIBUS
network output data sent from the master to the ILX69-PBS. The data is then transferred
from the ILX69-PBS to the controller via the AOI. The maximum size of PROFIBUS network
output data is 244 bytes.
6.2.3 Output Array
Device Command Register
The Device Command Register is transferred from the controller to the ILX69-PBS via the
output data image. This register lies in the first 4 bytes of the output image.
Device Command Register
Byte Offset Structure Member Data type Description
0 MCB SINT Module Command Bits, see table below
1 Reserved SINT Reserved
2 Reserved SINT Reserved
3 ExtStaSelect SINT Extended Status Information Select, see table below
MCB - Module Command Bits
Bit Offset Structure Member Data type Description
0 Reserved BOOL Reserved
1 Reserved BOOL Reserved
2 Reserved BOOL Reserved
3 Reserved BOOL Reserved
4 Reserved BOOL Reserved
5 NRDY BOOL Not ready - With this bit, the user program can make
a controlled start or stop of the ILX69-PBS
communications with the PROFIBUS master.
6 INIT BOOL Initialization - With this bit, the user program can
execute a Reset (Warmboot) of the ILX69-PBS.
7 RST BOOL Reset - With this bit, the user program can execute a
Reset (Coldboot) of the ILX69-PBS.
Important: Using the RST Reset command will cause an immediate
interruption in bus communication. The connection to the network master
will be closed.