ProSoft Technology ILX69-PBS - Manual (Page 37)

ILX69-PBS ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS Slave Communication Module User Manual
ProSoft Technology, Inc. Page 37 of 102
March 20, 2015
Module Properties 1
1 The communications parameters for the module should be set as shown in the dialog
below.
2 Enter PBS as the N AME and enter a short description for the module.
3 Select the Slot number in which the module is installed in the CompactLogix system. It
must be within 2 slots of a power supply.
4 Select Data - INT as the Comm_Format.
5 Set the Connection Parameters as they are shown in the dialog above.
6 Select Next >> or OK for the next configuration dialog.