PLANET FPS-1012N - Manual (Page 96)

3.6.3.1 MAC 10.4.x
To enable LPR Printing in Macintosh 10.4.x, please follow the procedures
below.
1. Open Print and Fax from the System Preferences.
2. With the Printing tab selected, click the “Add” button.
3. When the Printer Browser opens, select “IP Printer”.
4. In the “IP Printer” screen, please configure as below.
Protocol: Select Line Printer Daemon - LPD as the Protocol.
IP Address: Set the address to the MFP Server’s IP Address, for
example: 192.168.2.3.
Queue: Set the queue name to lpt1.
Name: You can designate a name for the MFP or printer.
Location: You can enter the location of the MFP or printer.
Printer: Select the MFP or printer model that is attached to the MFP
Server.
5. Click “Add” to complete the MFP or printer installation.
3.6.3.2 MAC 10.3.x
To enable LPR Printing in Macintosh 10.3.x, please follow the procedures
below.
1. In the Desktop, click “System Preferences”.
2. Click “Print & Fax”.
96