PLANET FPS-1012N - Manual (Page 36)

2.6 MFP Manager
2.6.1 MFP Server List
The “MFP Manager” can automatically find the MFP server in the network
and show it in the MFP Server List. Users can select a MFP and click
“Connect” to connect the MFP just like you have directly connected the
MFP to your computer through USB cable. It also displays the information
of the connection status.
When you don’t want to use the MFP or Printer, please click “Disconnect”
so that other users can use the device. Or you can enable the “Auto
Release” setting, so that the MFP Server will release your connection after
a period of idle time that you have assigned.
If you unplug the USB cable or turn off the MFP while using, the device
will not display in the list. After you reconnect the USB cable or turn on
MFP, you have to click “Refresh” and “Connect” buttons in the “MFP
Manager” to recover the connection.
MFP Server List
MFP Server List The “MFP Server List” will list all the MFP Servers
36