PLANET FPS-1012N - Manual (Page 107)

4.3.2 Wireless
If you want to use the MFP Server through wireless LAN, please set up the
MFP Server through Ethernet first and make sure your wireless LAN
setting is correct. After setting the wireless LAN, unplug the Ethernet
cable and restart the MFP Server, then you can start to use the MFP
Server through wireless LAN. If the wireless configuration does not work,
please plug the Ethernet cable again, restart the MFP Server and configure
the MFP Server through Ethernet until the wireless LAN settings are
correct.
You can enable/disable the wireless function and set up the wireless
parameters for the MFP Server from here. The parameters include
“Function”, “Mode”, “ESSID” and “Channel Number”. You can manually set
the wireless network that you want to connect in this page or use the
“Site Survey” function to automatically search for an available wireless
network and associate with it.
z
Function is for user to disable, enable or let the MFP Server auto
select to connect to the wired or wireless network. If “Disable” is
selected, the MFP Server can only connect to the network through
wired Ethernet. If “Enable” is selected, the MFP Server can only
107