PLANET FPS-1012N - Manual (Page 41)

2.6.3 Auto Connect List
To let the system occupy the MFP server automatically when you want to
print a document just like the behavior of using traditional print server,
you can add the MFP into your Auto Connect List. The system will send the
printing jobs to the MFP when the MFP Server is idle and not being
connected.
" Note
If you have sent a printing job to the MFP while the MFP is
connecting by a user, you may be prompted that the device is
not found or the document is failed to print. It also happens in
some MFPs or printers even though the MFP is not connecting
by a user. Please follow the message to retry and the MFP will
queue your printing job in your computer spooler. The MFP
Server will then print the job after the MFP is idle or
disconnected.
To add the MFP to the Auto Connect List, please follow the steps below.
1. Click “Add” from the “Auto Connect List”.
2. The MFP Servers within the network will be displayed in the following
screen. Select the MFP Server you would like to add to the list.
41