PLANET FPS-1012N - Manual (Page 37)

37
within the network. You can find the information of
the MFP Servers including “MFP Server Name”, “MAC
ID”, “IP Address” and the device that is connected to
the MFP Server.
MFP Server/MFP
Information When you are clicking on the “MFP Server” in the “MFP
Server List”, you will see the “MFP Server Description”
and the “Idle Timeout” setting for the MFP Server.
MFP Server Description – It is a description that
can help users to identify where or what the MFP
Server is.
Idle Timeout – From here, each user can know
his/her auto release setting. To avoid occupying the
MFP overtime, each user can enable the “Auto
Release” setting at the bottom of the “MFP Manager”
utility. It is used to automatically disconnect the
connection after the MFP is idle for a specified period
of time. By default, it is never released.
When you are clicking on the “MFP” in the “MFP Server
List”, you will see the information including “Status”,
“Computer Name” and “Contact Information”.
Status – It displays the status of the MFP including
Connected, Idle and Busy. When the status is
“Connected”, it indicates that you are connecting the
MFP. When the status is “Idle”, it indicates that the
MFP is not being used. When the status is “Busy”, it
indicates that other user is using the MFP to scan,
print, or etc.
Computer Name – It display the computer name of
the user who is connecting to the MFP.
Contact Information – When the current user has
set his “Contact Information”, you can see it here. You