PLANET FPS-1012N - Manual (Page 57)

" Note
After you have set the wireless function, please remove the
Ethernet cable and then re-plug the power jack of the MFP
Server to activate the wireless connection.
(2) Enable
Enable wireless function only, the MFP Server’s wireless LAN will be
always enabled and Ethernet will be always disabled.
(3) Disable
Disable the wireless function, the MFP Server’s wireless LAN will be
always disabled and Ethernet will be always enabled.
After selecting the operation modes of the wireless function, click “Next”
to go to further detailed configuration.
z
Infrastructure Mode:
In the Infrastructure mode, you have to let the MFP Server associate with
an access point. You let the MFP Server scan for an available access point
automatically or manually assign the SSID of the access point you want to
57