PLANET FPS-1012N - Manual (Page 56)

Double Click “Wireless” icon and the wireless configuration window will
pop-up. If you use access point to build up wireless network, you have to
select “Infrastructure Mode”. If you do not have any access point and want
to use peer-to-peer connection to build up wireless network, you have to
select “Ad-Hoc Mode”.
For Wireless Function, you can select “Auto”, Enable” or “Disable” to
manually configure the wireless function.
(1)Auto
“Auto” is the default setting of the MFP Server. At this mode, the MFP
Server will automatically decide to enable or disable the wireless
function. When the MFP Server starts up, it will auto-detect if the LAN
port is connected to an active network by an Ethernet cable. If this is
the case, the MFP Server will run in Ethernet mode. If the MFP Server
is not connected to an active network by Ethernet cable, the MFP
Server will run in wireless LAN mode. Users can plug the Ethernet
cable to the MFP Server at the first, after configuring the MFP Server
features and wireless settings; they can unplug the Ethernet cable to
enable the wireless connection. It makes the configuration much
easier without creating the wireless connection in advance.
56