beautypg.com

PLANET FPS-1012N User Manual

Page 93

background image

93

Where hostname is the device name of a MFP Server, the ht=1 tag

specifies the hardware type is Ethernet, the ha= tag specifies the
Ethernet address of a MFP Server, which is the Node ID located on the
MFP Server. The ha tag must be preceded by the ht tag. The ip= tag

should correspond to the IP address you want to assign to the MFP
Server.
For example, a MFP Server with the following configuration:

Node ID: 0000B4010101 (this implies Ethernet address is
0000B4010101),
IP address: 203.66.191.12

The entry for this MFP Server in the /etc/bootptab file should be:

MF010101:\

:ht=1:\
:ha=0000B4010101:\
:ip=203.66.191.12:


See also other documents in the category PLANET Communication: