PLANET FPS-1012N - Manual (Page 64)

advanced encryption methods, i.e. TKIP or AES and enter a set of shared
key.
z
TKIP – TKIP (Temporal Key Integrity Protocol) changes the temporal
key every 10,000 packets. This insures much greater security than the
standard WEP security.
z
AES – AES has been developed to ensure the highest degree of
security and authenticity for digital information and it is the most
advanced solution defined by IEEE 802.11i for the security in the
wireless network.
z
Key – Enter 8 to 63 digits of ASCII format to be the key for the
authentication within the network.
z
WPS
Wi-Fi Protected Setup (WPS) is the simplest way to build connection
between wireless network clients and this router. You don’t have to select
encryption mode and input a long encryption pass phrase every time when
you need to setup a wireless client, you only have to press a button on
wireless client and this wireless router, and the WPS will do the setup for
you.
This MFP Server supports two types of WPS: Push-Button Configuration
(PBC) and PIN code.
z
If you want to use PBC, you have to press “Start PBC” button and push
a specific button on the wireless client to start WPS mode.
z
If you want to use PIN code, you have to know the PIN code of
wireless client and switch it to WPS mode, then set the PIN code of the
wireless client you wish to connect to this router in the WPS setup page
and click “Start PIN” button to start WPS mode.
64