PLANET FPS-1012N - Manual (Page 30)

2.5.1 Share Print
The MFP will be added to “Printers and Faxes” in the Windows after the
MFP is installed. When you have connected to the MFP by clicking
“Connect” in the “MFP Manager”, the MFP Server will auto create the
connection between the MFP and your computer and then you can print a
document just follows the same steps as usual.
" Note
If you have sent a printing job to the MFP while the MFP is
connecting by a user, you may be prompted that the device is
not found or the document is failed to print. Please resend the
printing job after the MFP is idle or not being connected.
30