PLANET FPS-1012N - Manual (Page 53)

DHCP server. You can enable this DHCP server and let it manages IP for
you.
z
IP Address Assignment:
Click the “IP” button to enter the IP setting page. If you need the MFP
Server to automatically get an IP from DHCP server, select “Auto IP”. You
also can select “Static IP” to manually assign “IP Address”, “Subnet Mask”
and “Gateway” for the MFP Server. By default, “Static IP” is enabled and
the default settings are as follows.
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
z
Auto IP – The IP Address information of the MFP Server obtained
from DHCP Server will be displayed in the address field. If no DHCP
Server is present, you have to assign the information manually.
z
Static IP – Manually assign the IP address information in the same
network with your computer to the MFP Server.
z
DHCP Server - Click the “DHCP Server” button to enter into the DHCP
server’s setting page. By the default, the DHCP server is disabled.
(1) Auto
If “Auto” is selected, the MFP Server will detect DHCP server within
the network automatically and once the DHCP server doesn’t exist,
the MFP Server will turn on his own DHCP server and assign IP
Address to client. Please fill in the “Starting Address”, “Range”,
“Subnet Mask”, “Gateway” and “DNS”; then the MFP Server will assign
a unique IP within the range for each DHCP client.
(2) Enable
If the DHCP is enabled, you have to assign a range of IP addresses.
Fill in the “Starting Address”, “Range”, “Subnet Mask”, “Gateway” and
“DNS”; then the MFP Server will assign a unique IP within the range
53