PLANET FPS-1012N - Manual (Page 106)

4.3 Setup Wizard
4.3.1 System
" Note
You can configure the MFP Server from the Setup Wizard. To let
the changes take effect, you have to click “Save Settings” in
the menu of the left side to reboot the MFP Server.
You can change the MFP Server name and password of the MFP Server
from here.
z
MFP Server Name, the name of the MFP Server. You can use this
name to identify the MFP Server when you are searching for the MFP
Server by the “Server Manager” utilities.
z
Password, enter the password you want to change to the MFP Server.
The password can be up to 7-digit alphanumeric format. The default
password is “1234”.
z
Re-type Password, enter the same password for the MFP Server
again.
106