PLANET FPS-1012N - Manual (Page 117)

4.4.2 Upgrade from Browser
You can upgrade new firmware for this MFP Server in this page. Click
“Browse” to select the new firmware in your storage and then click “OK”,
the firmware will be updated in several minutes.
Be aware that if you have started upgrading firmware, you have to follow
all the upgrading steps or the MFP Server can’t turn back to normal
configuration.
4.4.3 LPR Printing
LPR Printing (Line Printer Remote technology) allows users to connect to
MFPs or printers via TCP/IP for printing sharing. The computer with
Windows 98SE/Me/NT/2000/XP/2003/Vista operating system can use the
protocol to share printing in the network. MFP Server can support LPR
printing by default.
If you install the MFP Server in Windows 98SE/Me/NT, the MFP Server
provides a tool “Network Port Setup” that helps to add the LPR protocol to
users’ computer easily. Please refer to Chapter 10.
To configure the LPR setting in Windows 2000/XP/2003/Vista, please
follow the steps below. Note that the following procedures are running in
117