beautypg.com

3 tcp/ip – PLANET FPS-1012N User Manual

Page 114

background image

4.3.3 TCP/IP

You can configure the MFP Server to automatically get IP from DHCP

server or manually specify static IP.

If you need the MFP Server to automatically get an IP from DHCP server,

select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/ BOOTP)”.
You also can select “Disable Use the following TCP/IP Settings” to
manually assign “IP Address”, “Subnet Mask” and “Gateway” for the MFP

Server.

114

See also other documents in the category PLANET Communication: