PLANET XRT-501 - Manual (Page 76)

Clear Form Clear the "Properties" box, ready for entering data for a new PC.
Refresh Update the data on screen.
Generate
Report
Display a read-only list showing full details of all entries in the PC
database.
Standard
Screen
Click this to view the standard PC Database screen.
4.6 Remote Administration
If enabled, this feature allows you to manage the XRT-501 via the Internet.
Parameter Description
Remote Administration
Enable Remote
Management
Enable to allow management via the Internet. If Disabled, this
device will ignore management connection attempts from the
Internet.
Port Number Enter a port number between 1024 and 65535. The default for
HTTP (Web) connections is port 80, but using port 80 will
prevent the use of a Web "Virtual Server" on your LAN. So
using a different port number is recommended. The default
value is 8080.
The port number must be specified in your Browser when you
connect. To specify the port number :
1. From a remote location, start your Browser.
2. In the "Address" or "Location" field, enter the Internet IP
address of this device (NOT the LAN IP address),
followed by the port number, as follows:
http://ip_address:port_numberm
Where:
76