PLANET XRT-501 - Manual (Page 39)

allows you to specify what user/packet can pass your router’s
NAT.
3.8 QoS You can configure the QoS control by four level.
3.9 Streaming
Accelerator Thist will get accelerate via enable this function.
3.10 IGMP IGMP (Internet Group Multicast Protocol): It is a session-layer
protocol used to establish membership in a multicast group.
3.11 Packet Capture It provides the feauture can monitor the LAN or WAN traffic.
3.12 WAN Port This section allows you to select the connection method in
order to establish a connection with your ISP (same as the
Wizard section)
Select one of the above advance features selections and proceed to the manual’s relevant
subsection.
3.1 Access Control
The Access Control feature allows administrators to restrict the level of Internet Access
available to PCs on your LAN. With the default settings, everyone has unrestricted Internet
access.
To use this feature:
Set the desired restrictions on the "Default" group. All PCs are in the "Default" group
unless explicitly moved to another group.
Set the desired restrictions on the other groups ("Group 1", "Group 2", "Group 3" and
"Group 4") as needed.
Assign PC to the groups as required.
Note
Restrictions are imposed by blocking "Services", or types of connections.
All common Services are Pre-Defined.If required, you can also define your
own Services.
39