PLANET XRT-501 - Manual (Page 34)

Disconnect If connected to your ISP, hang up the connection.
Clear Log Delete all data currently in the Log. This will make it
easier to read new messages.
Refresh Update the data on screen.
Connection Status - L2TP
If using L2TP, a screen like the following example will be displayed when the "Connection
Details" button is clicked.
Parameter Description
Connection
Physical Address The hardware address of this device, as seen by remote
devices on the Internet. (This is different as the
hardware address by the devices on the local LAN.)
IP Address The IP Address of this device, as seen by Internet users.
This address is allocated by your ISP (Internet Service
Provider).
Connection Status This indicates whether or not the connection is currently
established.
If the connection does not exist, the "Connect" button
can be used to establish a connection.
If the connection currently exists, the "Disconnect"
button can be used to break the connection.
34