PLANET XRT-501 - Manual (Page 47)

Parameter Description
Checkbox Use this to Enable or Disable this Special Application as
required.
Name Enter a descriptive name to identify this Special
Application.
Incoming
Ports
Type: Select the protocol (TCP or UDP) used when
you receive data from the special application or
service. (Note: Some applications use different
protocols for outgoing and incoming data).
Start: Enter the beginning of the range of port
numbers used by the application server, for data you
receive. If the application uses a single port number,
enter it in both the "Start" and "Finish" fields.
Finish:Enter the end of the range of port numbers
used by the application server, for data you receive.
Outgoing
Ports
Type:Select the protocol (TCP or UDP) used when
you send data to the remote system or service.
Start:Enter the beginning of the range of port
numbers used by the application server, for data you
send to it. If the application uses a single port
47