PLANET XRT-501 - Manual (Page 33)

Parameter Description
Connection
Physical Address The hardware address of this device, as seen by remote
devices on the Internet. (This is different as the
hardware address by the devices on the local LAN.)
IP Address The IP Address of this device, as seen by Internet users.
This address is allocated by your ISP (Internet Service
Provider).
PPTP Status This indicates whether or not the connection is currently
established.
If the connection does not exist, the "Connect" button
can be used to establish a connection.
If the connection currently exists, the "Disconnect"
button can be used to break the connection.
Connection Log
Connection Log The Connection Log shows status messages relating to
the existing connection.The "Clear Log" button will
restart the Log, while the Refresh button will update the
messages shown on screen.
Buttons
Connect If not connected, establish a connection to your ISP.
33