PLANET XRT-501 - Manual (Page 36)

This address is allocated by your ISP (Internet Service
Provider).
Connection Status This indicates whether or not the connection is currently
established.
If the connection does not exist, the "Connect"
button can be used to establish a connection.
If the connection currently exists, the "Disconnect"
button can be used to break the connection.
Normally, it is not necessary to use the Connect and
Disconnect buttons unless the setting "Connect
automatically, as required" is disabled.
Connection Log
Connection Log The Connection Log shows status messages relating to
the existing connection.
Buttons
Connect If not connected, establish a connection to Telstra Big
Pond.
Disconnect If connected to Telstra Big Pond, terminate the
connection.
Clear Log Delete all data currently in the Log. This will make it
easier to read new messages.
Refresh Update the data on screen.
Connection Details - SingTel RAS
If using the SingTel RAS access method, a screen like the following example will be
displayed when the "Connection Details" button is clicked.
36