PLANET XRT-501 - Manual (Page 31)

Parameter Description
Internet
Physical Address The hardware address of this device, as seen by remote
devices on the Internet. ((This is different as the
hardware address by the devices on the local LAN.)
IP Address The IP Address of this device, as seen by Internet users.
This address is allocated by your ISP (Internet Service
Provider).
Network Mask The Network Mask associated with the IP Address
above.
PPPoE Link Status This indicates whether or not the connection is currently
established.
If the connection does not exist, the "Connect" button
can be used to establish a connection.
If the connection currently exists, the "Disconnect"
button can be used to break the connection.
Connection Log
Connection Log The Connection Log shows status messages relating to
the existing connection.
The most common messages are listed in the table
below.
The "Clear Log" button will restart the Log, while the
Refresh button will update the messages shown on
screen.
Buttons
Connect If not connected, establish a connection to your ISP.
Disconnect If connected to your ISP, hang up the connection.
Clear Log Delete all data currently in the Log. This will make it
easier to read new messages.
Refresh Update the data on screen.
Connection Log Messages
Parameter Description
Connection Log Messages
31