PLANET XRT-501 - Manual (Page 32)

Connect on Demand Connection attempt has been triggered by the "Connect
automatically, as required" setting.
Manual connection Connection attempt started by the "Connect" button.
Reset physical connection Preparing line for connection attempt.
Connecting to remote
server
Attempting to connect to the ISP's server.
Remote Server located ISP's Server has responded to connection attempt.
Start PPP Attempting to login to ISP's Server and establish a PPP
connection.
PPP up successfully Able to login to ISP's Server and establish a PPP
connection.
Idle time-out reached The connection has been idle for the time period
specified in the "Idle Time-out" field. The connection will
now be terminated.
Disconnecting The current connection is being terminated, due to
either the "Idle Time-out" above, or "Disconnect" button
being clicked.
Error: Remote Server not
found
ISP's Server did not respond. This could be a Server
problem, or a problem with the link to the Server.
Error: PPP Connection
failed
Unable to establish a PPP connection with the ISP's
Server. This could be a login problem (name or
password) or a Server problem.
Error: Connection to
Server lost
The existing connection has been lost. This could be
caused by a power failure, a link failure, or Server
failure.
Error: Invalid or unknown
packet type
The data received from the ISP's Server could not be
processed. This could be caused by data corruption
(from a bad link), or the Server using a protocol which is
not supported by this device.
Connection Status - PPTP
If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will
be displayed when the "Connection Details" button is clicked.
32