PLANET XRT-501 - Manual (Page 30)

use the "Renew" button if you wish to manually renew
the lease immediately.
Buttons
Release/Renew Button
will display EITHER
"Release" OR "Renew"
This button is only useful if the IP address shown above
is allocated automatically on connection. (Dynamic IP
address). If you have a Fixed (Static) IP address, this
button has no effect.
If the ISP's DHCP Server has NOT allocated an IP
Address for the XRT-501, this button will say
"Renew". Clicking the "Renew" button will attempt to
re-establish the connection and obtain an IP Address
from the ISP's DHCP Server.
If an IP Address has been allocated to XRT-501
(by the ISP's DHCP Server), this button will say
"Release". Clicking the "Release" button will break
the connection and release the IP Address.
Refresh Update the data shown on screen.
Connection Status - PPPoE
If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed
when the "Connection Details" button is clicked.
30