PLANET XRT-501 User Manual

Page 2

Copyright

The products and programs described in this User’s Manual are licensed products of

PLANET Technology, This User’s Manual contains proprietary information protected by

documentation are copyrighted. No part of this User’s Manual may be copied, photocopied,

reproduced, translated, or reduced to any electronic medium or machine-readable form by

any means by electronic or mechanical. Including photocopying, recording, or information

storage and retrieval systems, for any purpose other than the purchaser's personal use,

and without the prior express written permission of PLANET Technology.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all

environments and applications, and makes no warranty and representation, either implied

or expressed, with respect to the quality, performance, merchantability, or fitness for a

particular purpose PLANET has made every effort to ensure that this User’s Manual is

accurate; PLANET disclaims liability for any inaccuracies or omissions that may have

occurred.Information in this User’s Manual is subject to change without notice and does not

represent a commitment on the part of PLANET. PLANET assumes no responsibility for

any inaccuracies that may be contained in this User’s Manual. PLANET makes no

commitment to update or keep current the information in this User’s Manual, and reserves

the right to make improvements to this User’s Manual and/or to the products described in

this User’s Manual, at any time without notice.If you find information in this manual that is

incorrect, misleading, or incomplete, we would appreciate your comments and suggestions.

FCC Compliance Statement

This equipment generates and uses radio frequency energy and if not installed and used

properly, that is, in strict accordance with the instructions provided with the equipment, may

cause interference to radio and TV communication. The equipment has been tested and

found to comply with the limits for a Class A computing device in accordance with the

specifications in Subpart B of Part 15 of FCC rules, which are designed to provide

reasonable protection against such interference in a residential installation. However, there

is no guarantee that interference will not occur in a particular installation. If you suspect this

equipment is causing interference, turn your Ethernet Switch on and off while your radio or

TV is showing interference, if the interference disappears when you turn your Ethernet

Switch off and reappears when you turn it back on, there is interference being caused by

the Ethernet Switch. You can try to correct the interference by one or more of the following

measures:

1. Reorient the receiving radio or TV antenna where this may be done safely.
2. To the extent possible, relocate the radio, TV or other receiver away from the Switch.
3. Plug the Ethernet Switch into a different power outlet so that the Switch and the receiver

are on different branch circuits.