PLANET XRT-501 - Manual (Page 35)

Connection Log
Connection Log The Connection Log shows status messages relating to
the existing connection.
The "Clear Log" button will restart the Log, while the
Refresh button will update the messages shown on
screen.
Buttons
Connect If not connected, establish a connection to your ISP.
Disconnect If connected to your ISP, hang up the connection.
Clear Log Delete all data currently in the Log. This will make it
easier to read new messages.
Refresh Update the data on screen.
Connection Status - Telstra Big Pond
An example screen is shown below.
Parameter Description
Connection
Physical Address The hardware address of this device, as seen by remote
devices. (This is different as the hardware address by
the devices on the local LAN.)
IP Address The IP Address of this device, as seen by Internet users.
35