PLANET XRT-501 - Manual (Page 66)

4.7 Routing Only required if your LAN has other Routers or Gateways.
4.8 Security
Firewall and other security-related settings. Normally, the
default settings do not need to be changed.
4.9 Upgrade
Firmware
Upgrade the Firmware (software) installed in your XRT-501
Router.
4.10 Log Out Logout XRT-501.
4.1 Config File
This feature allows you to download the current settings from the XRT-501, and save them
to a file on your PC. You can restore a previously-downloaded configuration file to the
XRT-501, by uploading it to the XRT-501.
This screen also allows you to set the XRT-501 back to its factory default configuration. Any
existing settings will be deleted.
An example Config File screen is shown below.
Parameter Description
Backup Config Use this to download a copy of the current configuration,
and store the file on your PC. Click Download to start the
download.
Restore Config This allows you to restore a previously-saved
configuration file back to the XRT-501.
Click Browse to select the configuration file, then click
66