PLANET ADW-4401 - Manual (Page 72)

The following table describes the parameters of this page:
Field Description
System Time Set the system time manually.
NTP Configuration
State
Select enable or disable NTP function. You need to enable
NTP if you want to configure the parameters of NTP.
Server Set the primary NTP server manually.
Server2 Set the secondary NTP server manually.
Time Zone
Choose the time zone in which area you are from the drop
down list.
3.8 Diagnostic
In the navigation bar, click Diagnostic. The Diagnostic page that is displayed contains
Ping, ATM Loopback, ADSL and Diagnostic Test.
3.8.1 Ping
Choose Diagnostic > Ping. The page shown in the following figure appears.
The following table describes the parameter and button of this page:
Field Description
Host Enter the valid IP address or domain name.
PING Click it to start to Ping.
72