PLANET ADW-4401 - Manual (Page 69)

The following table describes the parameters and button of this page:
Field Description
Reboot from
You can choose Save Current Configuration or Factory
Default Configuration.
Save Current Configuration: Reset to the factory
default settings, and then reboot the router.
Factory Default Configuration: Save the current
settings, and then reboot the router.
Reboot Click it to reboot the router.
3.7.2 Upgrade
Choose Admin > Upgrade. The Upgrade page that is displayed contains Upgrade
Firmware and Backup/Restore.
Caution:
Do not turn off the router or press the Reset button while the procedure is in
progress.
3.7.2.1 Upgrade Firmware
Click Upgrade Firmware in the left pane, the page shown in the following figure appears.
In this page, you can upgrade the firmware of the router.
The following table describes the parameters and button of this page:
Field Description
Select File Click Browse to select the firmware file.
Upload
After selecting the firmware file, click Upload to starting
upgrading the firmware file.
Reset Click it to starting selecting the firmware file.
69