PLANET ADW-4401 - Manual (Page 38)

The following table describes the parameters and buttons in this page:
Field Description
IP Address
It displays the IP address assigned to the DHCP client from the
router.
MAC Address
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address. The MAC
address is assigned at the factory and it consists of six pairs of
hexadecimal character, for example, 00-A0-C5-00-02-12.
Expired (s)
It displays the lease time. The lease time determines the period
that the host retains the assigned IP addresses before the IP
addresses change.
Refresh Click it to refresh this page.
Close Click it to close this page.
In the DHCP Mode field, choose None. The page shown in the following figure appears.
In the DHCP Mode field, choose DHCP Relay. The page shown in the following figure
appears.
The following table describes the parameters and buttons of this page:
Field Description
DHCP Mode
If set to DHCP Relay, the router acts a
surrogate DHCP Server and relays the DHCP
requests and responses between the remote
server and the client.
Relay Server
Enter the DHCP server address provided by
your ISP.
Apply Changes Click it to save the settings of this page.
Undo Click it to refresh this page.
38