PLANET ADW-4401 - Manual (Page 44)

3.4.3.1 Basic Setting
Go to WLAN Æ Basic Settings to setup the wireless parameters.
The following table describes the parameters of this page:
Field Description
Disable Wireless LAN Interface
Click to disable the WLAN Interface. The Wireless Interface
default is Enable.
Band
You can select the proper wireless type for your
requirements and environment. There are following types:
2.4GHz（B）/ 2.4GHz（G）/ 2.4GHz（B＋G）
Mode
The Wireless ADSL Router can work like an A cces Point . The
Default setting is AP.
SSID
The SSID (Service Set Identification) is the unique name
shared among all devices in a wireless network. The SSID
must be identical for all devices in the wireless network. Set
a string up to 32 letters to identify AP.
Channel
The channel will adjust according to nations to adapt to each
nation's frequency provision.
Channel Number
Select the appropriate channel to correspond with your
network settings. Auto is the default setting. All devices in
your wireless network must use the same channel in order to
function correctly.
Radio Power 10%, 25%, 50%, 80%, 100%.
Associated Clients Click it to show Active Clients.
44