PLANET ADW-4401 - Manual (Page 57)

The following table describes the parameters of this page:
Field Description
Service Type
You can select the common service type, for example,
AUTH, DNS, or FTP. You can also define a service name.
If you select Usual Service Name, the corresponding
parameter has the default settings.
If you select User-defined Service Name, you need to
enter the corresponding parameters.
Protocol
Choose the transport layer protocol that the service type
uses. You can choose TCP or UDP.
WAN Setting You can choose Interface or IP Address.
WAN Interface Choose the router port that uses virtual server.
WAN Port Choose the access port on the WAN.
LAN Open Port Enter the port number of the specified service type.
LAN IP Address
Enter the IP address of the virtual server. It is in the same
network segment with LAN IP address of the router.
3.5.2.5 DMZ Setting
Demilitarized Zone (DMZ) is used to provide Internet services without sacrificing
unauthorized access to its local private network. Typically, the DMZ host contains devices
accessible to Internet traffic, such as web (HTTP) servers, FTP servers, SMTP (e-mail)
servers and DNS servers.
Click DMZ Setting in the left pane, the page shown in the following figure appears.
The following describes how to configure DMZ.
Step 1 : Select Enable DMZ to enable this function.
Step 2 : Enter an IP address of the DMZ host.
Step 3 : Click Apply Changes to save the settings of this page temporarily.
57