PLANET ADW-4401 - Manual (Page 36)

3.4 Network
In the navigation bar, click Network. The Network page that is displayed contains LAN
and WAN.
3.4.1 LAN
Choose Network > LAN. The LAN page that is displayed contains LAN IP, DHCP, and
DHCP Static IP.
3.4.1.1 LAN IP
Click LAN IP in the left pane, the page shown in the following figure appears.
In this page, you can change IP address of the router. The default IP address is
192.168.1.1, which is the private IP address of the router.
The following table describes the parameters of this page:
Field Description
IP Address
Enter the IP address of LAN interface. It is recommended to
use an address from a block that is reserved for private use.
This address block is 192.168.1.1- 192.168.255.254.
Subnet Mask
Enter the subnet mask of LAN interface. The range of subnet
mask is from 255.255.0.0-255.255.255.254.
Secondary IP
Select it to enable the secondary LAN IP address. The two
LAN IP addresses must be in the different network.
36