PLANET ADW-4401 - Manual (Page 16)

Connect ADE-3410 to the PC’s USB port as follow:
z Connect the USB cable to USB port of ADE-3410. The cable has two different
connectors.
z Connect the other end of the USB cable to PC’s USB port.
Figure2 ADW-4401 connection diagram
If do not need to connect to the splitter,
z Connect the modem to wall jack with a telephone cable.
z Use Ethernet cable to connect “LAN” port of the modem and network adaptor of your
computer.
Note:
1. The ADE-3410 may connect via only USB or Ethernet. The preferred connectivity method
is to use the Ethernet. If your PC doesn’t support Ethernet port, you need to use USB
port and install additional software.
2. The default SSID of the ADW-4401 is “ADW-4401”.
16