PLANET ADW-4401 - Manual (Page 47)

Use 802.1x Authentication:
Enable 802.1x Authentication and select WEP 64bits or WEP 128bits for authentication.
Following is a description of the different options:
Field Description
Radius Port
Enter the port number of the authentication server. The default
port number is 1812.
Radius Server IP Address Enter the IP Address of the authentication server.
Radius Password Enter the same key as the Radius server’s.
Click "Apply Changes" again to save the wireless security options and make the change
take effect.
- WPA(TKIP) / WPA (AES) / WPA (TKIP) / WPA2(AES):
Wi-Fi Protected Access encrypts data frames before transmitting over the wireless network.
Following is a description of the different options:
Field Description
WPA Authentication Mode Select the Enterprise (RADIUS) or Personal (Pre-Shared Key).
Pre-shared Key Format Select the Passphrase or Hax format.
Pre-shared Key
Enter the pre-shared key for WPA. Client stations must use the
same key in order to connect with this device. Check the table
below for instructions when entering the key.
Radius Port
Enter the port number of the authentication server. The default port
number is 1812.
Radius Password Enter the same key as the Radius server’s.
Channel
The channel will adjust according to nations to adapt to each
nation's frequency provision.
Channel Number
Select the appropriate channel to correspond with your network
settings. Auto is the default setting. All devices in your wireless
network must use the same channel in order to function correctly.
Radio Power 10%, 25%, 50%, 80%, 100%.
Associated Clients Click it to show Active Clients.
Click "Apply Changes" again to save the wireless security options and make the change
take effect.
47