PLANET IGS-10020HPT - Manual (Page 75)

User’s Manual
Address The current address of the interface (of the given type).
The status flags of the interface (and/or address). Status
Network The destination IP network or host address of this route.  IP Routes
Gateway The gateway address of this route.
The status flags of the route. Status
IP Address The IP address of the entry.  Neighbor Cache
The Link (MAC) address for which a binding to the IP address given exist. Link Address
Buttons
Auto-refresh : Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the Page.
4.2.4 Users Configuration
This Page provides an overview of the current users. Currently the only way to login as another user on the web server is to
close and reopen the browser. After setup is completed, press “Apply” button to take effect. Please login web interface with
new user name and password, the screen in
Figure 4-2-4 appears.
Figure 4-2-4: Users Configuration Page Screenshot
The Page includes the following fields:
Object Description
 User Name The name identifying the user. This is also a link to Add/Edit User.

Privilege Level The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can access all
groups, i.e. that is granted the fully control of the device. But others value need to
refer to each group privilege level. User's privilege should be same or greater
than the group privilege level to have the access of that group.
By default setting, most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system maintenance
(software upload, factory defaults and etc.) need user privilege level 15.
Generally, the privilege level 15 can be used for an administrator account,
privilege level 10 for a standard user account and privilege level 5 for a guest
account.
75