PLANET IGS-10020HPT - Manual (Page 374)

User’s Manual
Priority Code Point value used for PTP frames.  PCP
Clock current Data Set
Object Description
Steps Removed : It is the number of PTP clocks traversed from the grandmaster
to the local slave clock.
 stpRm
Time difference between the master clock and the local slave clock, measured in
ns.
 Offset from master
The mean propagation time for the link between the master and the local slave  Mean Path Delay
Clock Parent Data Set
Object Description
Clock identity for the parent clock, if the local clock is not a slave, the value is the
clocks own id.
 Parent Port Identity
Port Id for the parent master port  Port
Parents Stats (always false).  P Stat
It is observed parent offset scaled log variance  Var
Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset
compared to the master. (unit = ns per s).
 Change Rate
 Grand Master Identity Clock identity for the grand master clock, if the local clock is not a slave, the
value is the clocks own id.
The clock quality announced by the grand master (See description of Clock
Default DataSet:Clock Quality)
 Grand Master Clock
Quality
Clock priority 1 announced by the grand master  Pri1
Clock priority 2 announced by the grand master  Pri2
Servo Parameters
Object Description
If true then Offset From Master, MeanPathDelay and clockAdjustment are logged
on the debug terminal
 Display
If true the P part of the algorithm is included  P-enable
If true the I part of the algorithm is included  I-enable
 D-enable If true the D part of the algorithm is included
374