PLANET IGS-10020HPT - Manual (Page 382)

User’s Manual
Object Description
This box is used to mark an ERPS for deletion in next Save operation.  Delete
This will create a Port 0 of the switch in the ring.  Port 0
This will create "Port 1" of the switch in the Ring. As interconnected sub-ring will
have only one ring port, "Port 1" is configured as "0" for interconnected sub-ring.
"0" in this field indicates that no "Port 1" is associated with this instance
 Port 1
The Port 0 Signal Fail reporting MEP.  Port 0 SF MEP
The Port 1 Signal Fail reporting MEP. As only one SF MEP is associated with
interconnected sub-ring without virtual channel, it is configured as "0" for such
ring instances. "0" in this field indicates that no Port 1 SF MEP is associated with
this instance.
 Port 1 SF MEP
The Port 0 APS PDU handling MEP.  Port 0 APS MEP
The Port 1 APS PDU handling MEP. As only one APS MEP is associated with
interconnected sub-ring without virtual channel, it is configured as "0" for such
ring instances. "0" in this field indicates that no Port 1 APS MEP is associated
with this instance.
 Port 1 APS MEP
Type of Protecting ring. It can be either major ring or sub-ring.  Ring Type
Major ring group ID for the interconnected sub-ring. It is used to send topology
change updates on major ring. If ring is major, this value is same as the
protection group ID of this ring.
 Major Ring ID
There is an active alarm on the ERPS.  Alarm
Buttons
: Click to add a new Protection group entry.
: Click to refresh the page immediately.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
382