PLANET IGS-10020HPT - Manual (Page 356)

User’s Manual
4.16.10 PoE Alive Check Configuration
The IGS-10020PT/HPT PoE Switch can be configured to monitor connected PD’s status in real-time via ping action. Once the
PD stops working and without response, the IGS-10020PT/HPT PoE Switch is going to restart PoE port port power, and bring
the PD back to work. It will greatly enhance the reliability and reduces administrator management burden.
This page provides you with how to configure PD Alive Check.The screen in Figure 4-16-10 appears.
Figure 4-16-10: PD Alive Check Configuration Screenshot
The page includes the following fields:
Object Description
 Mode Allows user to enable or disable per port PD Alive Check function.
As default value all ports are disabled.
 Ping PD IP Address This coulumn allows user to set PoE device IP address here for system making ping
to the PoE device. Please be noticed that the PD’s IP address must be set to the
356