4 ethernet ring protocol switch configuration – PLANET IGS-10020HPT User Manual
Page 383
User’s Manual
4.20.4 Ethernet Ring Protocol Switch Configuration
This page allows the user to inspect and configure the current ERPS Instance; screen in
Figure 4-20-4
appears.
Figure 4-20-4:
Ethernet Ring Protocol Switch Configuration page screenshot
The page includes the following fields:
Instance Data:
Object
Description
The ID of the Protection group.
ERPS ID
See help on ERPS create WEB.
Port 0
See help on ERPS create WEB.
Port 1
See help on ERPS create WEB.
Port 0 SF MEP
See help on ERPS create WEB.
Port 1 SF MEP
See help on ERPS create WEB.
Port 0 APS MEP
See help on ERPS create WEB.
Port 1 APS MEP
Type of Protecting ring. It can be either major ring or sub-ring.
Ring Type
Instance Configuration:
Object
Description
Configuration
Red
: This ERPS is only created and has not yet been configured - is not active.
Green
: This ERPS is configured - is active.
383