PLANET IGS-10020HPT - Manual (Page 23)

User’s Manual
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.
2 Digital Output (DO): Open collector to 24V DC, 100mA (max.)
Dimensions (W x D x H) 72 x 107 x 152mm 72 x 107 x 152mm
Weight 1684g 1684g
Power Requirements 48V DC 48V DC
Power Consumption
31.9 watts / 108.78BTU (Full loading
without PoE function)
161.9 watts / 522.08BTU (Full
loading with PoE function)
31.9 watts / 108.78BTU (Full loading without
PoE function)
306 watts / 1043.46BTU (Full loading with
PoE function)
LED Indicator
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green)
R.O. (Green)
Per 10/100/1000T RJ45 Port:
LNK/ACT (Green)
PoE In-Use (Orange)
Per SFP Interface:
LNK/ACT (Green)
1000 (Orange)
Power Over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet /
PSE
IEEE 802.3af / IEEE 802.3at Power over
Ethernet / PSE
PoE Power Supply Type End-span End-span
PoE Power Output
Per Port 48V DC, 350mA . Max. 15.4
watts
Per Port 56V DC, 350mA . Max. 15.4 watts
(IEEE 802.3af)
Per Port 56V DC, 590mA. Max. 30 watts
(IEEE 802.3at)
Power Pin Assignment 1/2(+), 3/6(-) 1/2(+), 3/6(-)
PoE Power Budget
130W maximum (depending on
power input)
270W maximum (depending on power input)
Max. number of Class 2 PD 8 8
Max. number of Class 3 PD 8 8
Max. number of Class 4 PD Not supported 8
Layer 2 Functions
Basic Management Interfaces Web browser, Remote Telnet, SNMPv1, v2c, local console
Secure Management Interface SSH, SSL, SNMPv3
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Port Status
Display each port’s speed duplex mode, link status, flow control status, auto
negotiation status, trunk status.
Port Mirroring
TX / RX / Both
Many to 1 monitor
VLAN
802.1Q tagged-based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
23