PLANET IGS-10020HPT - Manual (Page 105)

User’s Manual
4.3.3 SNMP Trap Configuration
Configure SNMP trap on this Page. The SNMP Trap Configuration screen in Figure 4-3-2 appears.
Figure 4-3-2: SNMP Trap Configuration Page Screenshot
The Page includes the following fields:
Object Description

Trap Config Indicates which trap Configuration's name for configuring. The allowed string
length is 0 to 255, and the allowed content is ASCII characters from 33 to 126.

Trap Mode Indicates the SNMP trap mode operation. Possible modes are:

Enabled : Enable SNMP trap mode operation.

Disabled : Disable SNMP trap mode operation.

Trap Version Indicates the SNMP trap supported version. Possible versions are:

SNMP v1 : Set SNMP trap supported version 1.

SNMP v2c : Set SNMP trap supported version 2c.
105