PLANET IGS-10020HPT - Manual (Page 349)

User’s Manual
4.16.5 Port Configuration
This section allows the user to inspect and configure the current PoE port settings as Figure 4-16-4 shows.
Figure 4-16-4: Power over Ethernet Configuration Screenshot
The page includes the following fields:
Object Description
 PoE Mode There are three modes for PoE mode.

Enable : enable PoE function..

Disable : disable PoE function.

Schedule : enable PoE function in schedule mode.
 Schedule Indicates the schedule profile mode. Possible profiles are:

Profile1

Profile2

Profile3

Profile4
 AF/AT Mode Allows user to select 802.3at or 802.3af compatibility mode. The default vaule is
802.3at mode.
This function wil affect PoE power reservation on Classification power limit mode
only, as 802.3af mode, system is going to reserve 15.4W maximum for PD that
supported Class3 level. As IEEE 802.3at mode, system is going to reserve
30.8Watts for PD that support Class4 level.
From class1 to class3 level on the 802.3at mode will be reserved the same PoE
power with 802.3af mode.
 Priority The Priority represents PoE ports priority. There are three levels of power priority
349